CONSTRUCTION:
With right sides facing sew the two short ends of the neckband together and press open. Turn to the right side and fold in half lengthways with wrong sides together. Stay stitch the two raw edges to hold in place. Lightly press and put aside.
With right sides together sew each long edge of the centre back panel to each straight edge of the back bodice pieces. Neaten with an overlocker/serger and press towards the outside.
With right sides facing sew the front and back shoulder seams together. Neaten with an overlocker/serger and press towards the back.
Sew the raw edges of the neckband to the neckline of the body, following the notches and stretching the neckband slightly as you sew. Neaten with overlocker/serger and press downwards. Sew an optional edgestitch close to the neckline on the side of the body.
With right sides facing sew the front and back side seams together. Note this seam is angled toward the front. Neaten with an overlocker/serger and press towards the back.
Neaten the hem of the body and sleeve openings with an overlocker/serger. Turn the hem of the body and sleeve openings to the inside and topstitch.
Lightly press your new t-shirt.
